NewSAP lists TheFlex as a reference browser for EWM (SAP Note 3048632).SAP lists TheFlex as an EWM reference browser.See details

Skip to content

Release of Version 6.3.0 ​

Version 6.3.0 brings two new features: a list of the web addresses that may be opened at all, and logging in with an NFC card. Everything to do with logging in is now under “Login” in the settings, the credentials for card login are better protected, and a minimized overlay tab can stay as a small handle. On top of that come many bug fixes, among others in the network analysis, in settings distributed via MDM and in the keyboard.

More in the documentation: Login with NFC Card, Login with certificate, Login with Smartcard and Overlay Tabs.

TypeDescription
🟢 New FeatureThe security settings now let you decide which web addresses may be opened at all. You enter the permitted addresses there. A star stands for any characters, so "https://.company.com" releases the whole company server. If a page tries to lead somewhere else, a red notice appears with a Back button that returns you to the last permitted page. So the list doesn't have to be written from memory, there is a learning mode: it blocks nothing but collects the addresses actually visited, and at the end you only have to weed out what you don't want. Whatever was blocked is listed in the settings with a counter and can be permitted there after a short confirmation, which shows beforehand what exactly will be allowed. You can also try an address out in advance: type it in and the app tells you whether it would open and which entry permits it, without loading the page. Once the list gets longer, a search field appears above it. The feature is off by default and can also be distributed via device management (MDM). Distributed addresses are marked as such in the list, and anything permitted locally survives the next sync.
🟢 New FeatureLog in with an NFC card: Under “Login > NFC login”, user and password can be written encrypted onto an NFC card. When the feature is switched on, login pages show a hint at the bottom that you can also log in with the card. Hold the card to the device, and TheFlex fills in user and password and logs in. This also works with logins that ask for the user first and for the password on a second page, as Microsoft does: holding the card once is enough. If you only hold the card on the password page, TheFlex only enters the password when that page shows the account on the card. If you like, set your own key so that only your own devices can read the cards. The feature is switched off by default and can also be switched on and off via device management (MDM).
🔵 ImprovementEverything to do with logging in is now in one place in the settings: the new “Login” section brings together certificate, FlexKey and NFC login. Each entry shows right away whether it is switched on, so you can see at a glance how the device logs in. Previously these settings were spread across “Security” and “Useful tools”. Existing settings and device management (MDM) values stay exactly as they are.
🔵 ImprovementInstead of a full-width bar, a minimized overlay tab can now also stay at the bottom as a small handle in the middle. This keeps buttons at the bottom edge of the page reachable without having to close the tab. Tapping or swiping up brings the tab back up; it is then closed with the X as usual. The handle can be switched on under “User interface > Minimized overlay tab”, also via MDM. The familiar bar remains the default.
🔵 ImprovementIf the app crashes unexpectedly, it now closes right away and can be restarted. Previously it kept running with a frozen, unusable screen that Android only reported as “not responding” after about a minute.
🔵 ImprovementA start page can now only be saved with a name. Until now the name could be left empty. The start page then appeared as a blank line in the list and could not be recognised when switching start pages. If the name is missing, the app now points this out, just like for scan configurations and automations.
🔵 ImprovementIf configured automations don't run because there is no valid license, the automations overview now points this out. Until now nothing happened in this case, with no way of telling why.
🔵 ImprovementThe app has become smaller: parts that weren't needed have been removed and the libraries it uses have been brought up to date.
🔵 ImprovementThe credentials for smart card login are now better protected. On the device they are stored encrypted, and the setup program FlexKey now also creates QR codes and values for device management (MDM) in encrypted form, so the card key can no longer be read off a printout or from the MDM console. When the settings are exported including passwords, it is only included in encrypted form as well. QR codes and MDM values that have already been distributed keep working unchanged. Important: only this version understands the new, encrypted values. All devices must be updated before switching over in the MDM.
🔵 ImprovementIf the server can't be reached, the error page now appears after 30 seconds. Until now the screen stayed blank for over a minute, with no sign of what was going on. The waiting time can be changed or switched off under "User interface" and can also be distributed via device management (MDM). Submitted forms and logins are excluded: there the app keeps waiting until the server responds.
🔵 ImprovementIn the settings and the setup assistant, fields can now also be filled with the built-in scanner when the scanner hands over its data via intent: tap the field, scan, done. On devices without a camera (e.g. Zebra MC3300), the QR buttons now open a “Scan with scanner” window instead of an error, where you simply scan the code. Also, a scan no longer ends up unnoticed in the web page in the background while the settings are open.
🔴 Bug FixSome pages closed the whole app when opening a new tab. This happened when the new tab first opened empty and the page was only loaded into it afterwards. The tab now opens normally and the app stays open.
🔴 Bug FixThe bundled NFC tools in the settings (NFC Writer and NFC Reader) showed an “An error occurred” message when opened and could not be used afterwards. They start normally again and are labelled in the device language right away.
🔴 Bug FixThe network analysis crashed on a weak Wi-Fi connection: if the server did answer but took longer than two seconds, the screen froze and no longer responded. Such pings are now listed as a failure and the measurement keeps running.
🔴 Bug FixIn the network analysis the total stopped at “500” from the 500th ping onwards even though measuring continued. The counter now keeps running. The list still shows the last 500 pings. A new measurement also starts from zero again instead of carrying on the figures of the previous one.
🔴 Bug FixIn the network analysis CSV export the columns shifted when a scanned position contained a semicolon.
🔴 Bug FixLong measurements in the network analysis used more and more memory over time because every displayed row was kept for good. This has been fixed.
🔴 Bug FixOn devices licensed through the backend, the app wrote error messages to the log every time the device information screen was opened, even though there was nothing wrong with the licence. The log filled up with messages that only got in the way when looking for a real problem. These entries no longer appear. The licence display itself was never affected.
🔴 Bug FixWhen CSS or JavaScript building blocks were distributed via device management (MDM) with the “Name” or “Address” field left empty, the app only started into a blank screen and could no longer be used, not even reinstalling helped. Incomplete entries are now skipped and the app starts normally, and the remaining building blocks from the profile still take effect.
🔴 Bug FixA home page distributed via device management (MDM) without an address led to a blank page on startup. Such incomplete home pages are now skipped.
🔴 Bug FixWhen the license was distributed via device management (MDM), the app sometimes discarded it again right at startup. The device then showed “no license installed” even though the profile contained a valid license. The license from the profile is now kept.
🔴 Bug FixImporting saved settings lost all automations, i.e. custom scripts and CSS. They are now kept.
🔴 Bug FixThe app language chosen under “User interface” was saved, but after the restart the app still appeared in the device language. The chosen language is applied again. In addition, the app no longer closes completely if the restart fails.
🔴 Bug FixA status bar hidden in the settings could reappear after rotating the device. The status and navigation bars now follow the setting after every rotation as well.
🔴 Bug FixOn CipherLab devices the network analysis could not be opened, the app froze instead. It opens normally again.
🔴 Bug FixIn the setup assistant, the bottom part of some pages could not be reached on small screens, not even by scrolling. In the dialog for exporting via QR code, the buttons were cut off on short screens. Both are fixed.
🔴 Bug FixIf the smart card configuration was damaged, for example by a value pasted incompletely into device management (MDM), the card login crashed. The last valid configuration now stays in effect.
🔴 Bug FixThe keyboard setting “Active on tap” now works reliably: the on-screen keyboard opens when you tap a field and stays open while you type, also on login pages, after submitting with Enter and after a scan. Previously it sometimes closed again right away, flickered or could not be opened at all. A scan still closes the keyboard as usual.
🔴 Bug FixWith the extended debug mode switched on, SAP ITS mobile sessions ended right after logging in. The first step showed “Session Timed Out”. You now stay logged in, debug mode or not.
🔴 Bug FixNFC cards are read again after switching pages. Previously, reading could silently stop until the page switched it on again.
🔴 Bug FixLinks that only contain “intent://” somewhere in their address (for example as a redirect target) open normally again instead of being handed over to another app.